more so if you put a couple hanger pipe/hose clamps around them.Ī different way of thinking about it. there should be less force being placed on them. but may make things easier, quick connects being plastic. is due to most likely only a couple straps to hold the manifold in place. The manifold needing to be metal (pipes / tees / valves) in it.

then each boom / wing has its own pressure gauge. 'the very top left guage' = main system pressure gauge. aluminum might work, but unknown about corrosion of agriculture chemicals. Manifold needs to be all 'metal' any plastic for Tees, 90's, short nipples / pipes = cracking / busting due to simple vibration and a little tugging from hoses. (when you open them up there is no reduction inside) quick connect couplers (banjo coupler) you should be able to find 125PSI versions on the cheap made out of sch 80 pvc. you could most likely get away with something costing less. that connects direct to pto snub on back of tractor. If needed, you can assemble this TeeJet AA145H-1 DirectoValve with other 145H DirectoValves.If you had an open-station (non-cab). Note: Do not surpass the maximum pressure of 100 psi or else damage to the valve may occur. Stainless steel wetted parts provide additional corrosion resistance. The nylon body on the TeeJet AA145H-1 is reinforced in fiberglass for excellent chemical resistance. A large internal flow chamber without pilot hole reduces the chances of clogging occurring.

An encapsulated solenoid coil can be changed without removing the valve from the system. This solenoid control valve is direct-acting and provides a continuous flow through the bypass connection, with the flow to the spray line controlled by the valve's on/off action. The TeeJet AA145H-1 DirectoValve Control Valve is an electric 2-way solenoid valve that can be used on agricultural and turf sprayer booms to provide a remote on/off boom control in low pressure applications.

Electric solenoid valve for sprayer